Identifies the Hardware:
x4 - 4.2x40mm sheet metal thread.
x4 - 4.2x19mm sheet metal thread (only for oem window regulators if maintained).
x4 - U clips (only for oem window regulators if maintained).
x4 - M6X12mm screws.
Facility:
1.- Remove the drawer unit and upper trim from the center console and, in the event that there are window regulators and/or warnings on our panel, remove them from said trim.
1.1.- If you have power window buttons or warnings, place them on our panel. The emergency one fits as is, the window regulators must be placed as they are shown in the following images, using the 4.2x19 screw caps in the yellow position and the corresponding metal clips. Once the screw is tightened, the switches are fixed.
2.- Place the panel on the console and connect the connectors to the controls before tightening the rest of the screws. The 4 blue screws indicated in the image are the ones you will have to use to fix the panel to the console with the longest self-tapping screws (4.2x40). EYE! when tightening we do not deform the panel.
3.- Position the interior panel of the change area. If you have a CAE or shortshift or similar, you can take the opportunity to readjust. If you want to make it even more curious, you can take advantage of this frame to install an upholstery that completely covers the hole. The screws to fix it are M6x12mm.
READY!