Facility

Puntos básicos instalación difusor bmw e46
Tiempo de instalación aproximado: 1'5 hora/s. Herramientas necesarias: Taladro, broca 6-8mm, llaves de 10mm + llave Allen. Dificultad de instalación: Fácil (conocimientos mecánicos básicos) Como verás la instalación es bastante sencilla, pero se requiere de cierta paciencia y comprobar que todo va en su sitio para garantizar que todo queda bien centrado. No te apresures y asegúrate de seguir los pasos. Una instalación correcta siempre garantiza un mejor acabado. Tornillería o "hardware" (entre paréntesis para difusores que incluyan el add-on del diferencial) x5 - Spacers de 18mm. x2 - Spacers... Read more...
BMW E34 panel installation
Approximate installation time: 1.5 hour/s. Necessary tools: Drill, 3 or 3.5mm drill bit, Phillips screwdriver, socket wrenches or hexagonal and allen keys. Installation difficulty: Easy (basic mechanical knowledge) As you'll see, the installation is quite simple, but it requires some patience and checking that everything is in place to ensure everything is as it should be. Don't rush and make sure you follow the steps. Proper installation always guarantees a better result. The first thing we need to do is identify the screws and hardware. For the front panels: x20... Read more...
Installation of polycarbonate window frames BMW E36 Coupe
Below we detail the correct installation of the frames, but before this, as we know that many do not make it to the end, we are going to start with the "Disclaimer" to save time and confusion. Are the frames easy to install? The frames are made of 4mm thick aluminum with CNC cutting machines. Their design has been made from anchor points that can be easily identified on the door, as you can see in the images shown below, so following the detailed steps, they should be identical to... Read more...
Center Console Installation BMW E46
Identifies the Hardware: x4 - 4.2x40mm sheet metal thread. x4 - 4.2x19mm sheet metal thread (only for oem window regulators if maintained). x4 - U clips (only for oem window regulators if maintained). x4 - M6X12mm screws. Facility: 1.- Remove the drawer unit and upper trim from the center console and, in the event that there are window regulators and/or warnings on our panel, remove them from said trim. 1.1.- If you have power window buttons or warnings, place them on our panel. The emergency one fits as is, the... Read more...
V1 diffuser installation - BMW e36
Approximate installation time: 1.5 hour/s. Required tools: Drill, 6-8mm drill bit, 10mm wrenches + Allen key. Installation difficulty: Easy (basic mechanical knowledge) As you can see, the installation is quite simple, but it requires some patience and checking that everything is in place to ensure that everything is well centered. Don't rush and make sure you follow the steps. A correct installation always guarantees a better finish. Screws or "hardware" (in parentheses for diffusers that include the differential add-on) x5 - 18mm Spacers. x4 - 10mm Spacers. x37 - Nuts... Read more...
BMW E46 Coupe Front Panels Installation
Approximate installation time: 1.5 hour/s. Necessary tools: Drill, 3 or 3.5mm drill bit, star screwdriver, 8mm socket or fixed socket + Allen wrench. Installation difficulty: Easy (basic mechanical knowledge) As you will see, the installation is quite simple, but it requires some patience and checking that everything is in place to guarantee that everything is as it should. Don't rush and make sure you follow the steps. A correct installation always guarantees a better result. The first thing we must do is identify the screws and hardware. For the front... Read more...
Installation of BMW E36 Coupe panels
Approximate installation time: 1.5 hours/s. Necessary tools: Drill, 3 or 3.5mm drill bit, star screwdriver, 8mm socket or fixed socket + allen key. Installation difficulty: Easy (basic mechanical knowledge) As you will see, the installation is quite simple, but it requires some patience and checking that everything is in place to ensure that everything is as it should. Don't rush and make sure you follow the steps. A correct installation always guarantees a better result. The first thing we must do is identify the screws and "hardware". For the front... Read more...
Measures baquet bases
Unlike other manufacturers, our bases are designed to center the seat as much as possible with respect to the steering wheel position, always within the possibilities of each body, bucket design, etc. Since they are designed to be fixed directly to the body without modifications, we need a specific measurement of the seat anchoring area to ensure that, once the bases are screwed to the bucket, they continue to coincide with the body anchoring points. It is important to note that the measurement we need is the width between anchors... Read more...